É«»¨ÌÃ

1. An experienced carpenter or a master with considerable knowledge of locks should be hired for installation. And according to the fixed-distance model in the product manual, drill holes, chisel the support socket, the lock plate and the lock box hole, so as to make preparations before installation.
2. Check whether the drilled holes are accurate, and strictly follow the steps in the product installation manual. If the lock switch is not found after installation
If it is flexible or cannot be opened, you should consult a locksmith master in time. The distributor of the product or the technical service department and after-sales service department of the manufacturer,
so that the problem can be solved.
3. If there is no problem with the product installation and inspection, remove the product, and reinstall the lock after the door is painted and dried (it is recommended to be more than two or three days). The purpose is to: prevent the paint from sticking to the lock product On the other hand, it affects the appearance and performance (often because the paint sticks to the lock and makes the transmission inflexible). When the paint is not dry, the gas of the chemical will corrode the product, accelerate the change of the surface treatment of the product, affect the appearance and reduce the durability of the lock. service life.